**************************************************************
*                                                            *
* AdditionalPrinters                                         *
*                                                            *
*    Allows additional printers other than the default       *
*    printer to be installed.                                *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=None                                               *
*        or                                                  *
*       m1:n1,m2:n2, ...                                     *
*                                                            *
*   Where m1, m2, etc. are port numbers as defined under     *
*   "PrinterPort" below, and n1, n2, etc. are indices into   *
*   PRDESC.LST as described for "DefaultPrinter" below.      *
*                                                            *
*   Example:                                                 *
*      AdditionalPrinters=2:150                              *
*                                                            *
*   This will put an IBM 2380 PPS II on LPT2:.  The 150      *
*   specifies the PPS II (it's line 150 in PRDESC.LST)       *
*   and the "2" specifies LPT2.                              *
*                                                            *
*   You can multiple port:printer specifications on this     *
*   line.  You can also have multiple AdditionalPrinters     *
*   statements.                                              *
*                                                            *
**************************************************************

AdditionalPrinters=0

**************************************************************
*                                                            *
* Advance Power Management                                   *
*                                                            *
*    Specifies whether or not to install APM.                *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Don't install                                      *
*       1=Autodetect (DEFAULT)                               *
*       2=Install                                            *
*                                                            *
**************************************************************

APM=1

***************************************************************
*                                                             *
* AlternateAdapter                                            *
*                                                             *
*    Specifies secondary adapter for two display systems.     *
*    This should be a lower or equal resolution display since *
*    the highest resolution display will be primary for PM.   *
*                                                             *
*    Valid Parms:                                             *
*                                                             *
*       0=None (DEFAULT)                                      *
*       1=Other than following (DDINSTAL will handle)         *
*       2=Monochrome/Printer Adapter                          *
*       3=Color Graphics Adapter                              *
*       4=Enhanced Graphics Adapter                           *
*       5=PS/2 Display Adapter                                *
*       6=Video Graphics Adapter                              *
*       7=8514/A Adapter                                      *
*       8=XGA Adapter                                         *
*       9=SVGA Adapter                                        *
*                                                             *
***************************************************************

AlternateAdapter=0

**************************************************************
*                                                            *
* BaseFileSystem                                             *
*                                                            *
*    Specifies which file system should be used to format    *
*    the install partition.  This keyword cannot be used     *
*    in conjunction with the FormatFAT or FormatHPFS         *
*    keywords.                                               *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       1=HPFS (DEFAULT)                                     *
*       2=FAT                                                *
*                                                            *
**************************************************************

BaseFileSystem=1

**************************************************************
*                                                            *
* CDROM                                                      *
*                                                            *
*    Specifies which, if any, CD ROM devices you wish to     *
*    install support for.                                    *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0 = None                                             *
*       1 = Autodetect                                       *
*       2=IDECD-ROM                                                               *
*       3=SCSIII CD-ROM                                                           *
*       4=Acer525E,625A,6825P,743E,747E                                           *
*       5=AztechCDA268-03I                                                        *
*       6=AztechCDA268-03I-SE                                                     *
*       7=AztechCDA468-0II                                                        *
*       8=AztechCDA468-02I                                                        *
*       9=AztechCDA668-01E                                                        *
*       10=AztechCDA668-01I-SE                                                    *
*       11=AztechIDE                                                              *
*       12=CDTechnology T3301, T3401                                              *
*       13=Chinon525I, 545I                                                       *
*       14=Chinon431, 435, 535                                                    *
*       15=CompaqIDE Dual Speed, Quad Speed, Tray Load                            *
*       16=CompaqSCSI-2 Tray Load                                                 *
*       17=CompaqSCSI-2 Dual Speed                                                *
*       18=CreativeLabs OmniCD                                                    *
*       19=CreativeLabs IDE CD220E,CD420E,CD620E                                  *
*       20=EliteGroup Computer Systems VERTOS 300SSD Elite                        *
*       21=GoldstarGCD-R520B,GCD-R540B,GCD-R560B,GCD-R580B                        *
*       22=Hitachi7730,7930                                                       *
*       23=Hitachi1650S,1750S,3650                                                *
*       24=Hitachi1950S,3750,6750                                                 *
*       25=IBMIDE 2X,4X,6X CD-ROM                                                 *
*       26=IBMCD-ROM I                                                            *
*       27=IBMCD-ROM I rev 242                                                    *
*       28=IBMCD-ROM II, Enhanced CD-ROM II                                       *
*       29=IBMISA,Panasonic 562,563                                               *
*       30=LionOptics XC-200AI,XC-200EI,XC-600EI                                  *
*       31=MitsumiCRMC-LU002S,Tandy CDR-1000                                      *
*       32=MitsumiCRMC-LU005S                                                     *
*       33=MitsumiCRMC-FX001                                                      *
*       34=MitsumiCRMC-FX001D                                                     *
*       35=MitsumiCRMC-FX001DE,FX300,FX400,FX400E,FX410A,FX600S                   *
*       36=NECIntersect 25,36,37,72,73,74,82,83,84                                *
*       37=NECMultiSpin 4Xc,4Xe,4Xi,3Xi,3Xe,3Xp,38,74-1,84-1                      *
*       38=NEC2vi,250,260,260GW,260R,271,272,273,MultiSpin 6V,8V,4x4              *
*       39=OpticsStorage 8001 IDE,8222 IDE,8322,8422                              *
*       40=PanasonicCF-41,CR-571,CR-572,CR-574,CR-581,LK-MC579                    *
*       41=PanasonicCR-501                                                        *
*       42=PanasonicLK-MC501S                                                     *
*       43=Panasonic521,522,523                                                   *
*       44=PhilipsLMS CM-205,CM-225                                               *
*       45=PhilipsLMS CM-205MS,206,225MS,226                                      *
*       46=PhilipsLMS CM-215                                                      *
*       47=PhilipsLMS CM-207                                                      *
*       48=PhilipsProfessional Solutions PCA62CR,PCA62CR 6x                       *
*       49=PhilipsIDE                                                             *
*       50=PioneerDRU-A124XP                                                      *
*       51=PioneerDRM-600                                                         *
*       52=PioneerDRM-604X                                                        *
*       53=PlextorDM-3028,DM-5028,4PLEX                                           *
*       54=SanyoCRD-254P,CRD-450P                                                 *
*       55=SonyCDU-31A,33A,7305,7405                                              *
*       56=SonyCDU-531,535,6150,6201,6205,6251,7201,7205                          *
*       57=SonyCDU-55D,55E,76E,760E,77E                                           *
*       58=Sony541,561,6211,7211,7811                                             *
*       59=Sony6111                                                               *
*       60=Texel5302B                                                             *
*       61=Texel3021,5021                                                         *
*       62=Texel3024,3028,5024,5028                                               *
*       63=ThinkPad755CD, TEAC CD-40E,CD-56E,CD-58E                               *
*       64=Toshiba3101,3201                                                       *
*       65=Toshiba3301,3401,3501,3601,3701,4101,5201,5301,5401                    *
*       66=Toshiba5302B                                                           *
*       67=WearnesCDD-120,CDD-620,CDD-820                                         *
*                                                            *
*    NOTE: Autodetection is enabled only when all scsi       *
*          device drivers are loaded.                        *
**************************************************************

CDROM=0

**************************************************************
*                                                            *
* CountryCode                                                *
*                                                            *
*    Specifies which country should be installed.  This      *
*    causes all country information to be installed.         *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       3 digit country code (DEFAULT shipped version)       *
*                                                            *
**************************************************************

CountryCode=001

**************************************************************
*                                                            *
* CountryKeyboard                                            *
*                                                            *
*    Specifies which country keyboard should be installed.   *
*    This causes all keyboard information to be installed.   *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       2-5 character keyboard code (DEFAULT="US")           *
*                                                            *
**************************************************************

CountryKeyboard=US

**************************************************************
*                                                            *
* DefaultPrinter                                             *
*                                                            *
*    Specifies which default printer to install              *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=None                                               *
*        or                                                  *
*                                                            *
*       Keyvalue=printer driver index (DEFAULT=line # of     *
*       42XX) in PRDESC.LST shipped on first printer diskette*
*                                                            *
*           NOTE: the driver index is the same as the line   *
*                 number in the ASCII PRDESC.LST file that   *
*                 the desired printer name appears on        *
*                                                            *
**************************************************************

DefaultPrinter=0

**************************************************************
*                                                            *
* DisplayAdapter                                             *
*                                                            *
*    Specifies which adapter should override the primary     *
*    adapter detected by the install process                 *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Accept as correct (DEFAULT)                        *
*       1=Other than following (DDINSTAL will handle)        *
*       2=Color Graphics Adapter                             *
*       3=Enhanced Graphics Adapter                          *
*       4=Video Graphics Adapter                             *
*       5=8514/A Adapter                                     *
*       6=XGA Adapter                                        *
*       7=SVGA Adapter                                       *
*                                                            *
**************************************************************

DisplayAdapter=0

**************************************************************
*                                                            *
* Documentation                                              *
*                                                            *
*    Specifies which documentation should be installed       *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=None                                               *
*       1=All (DEFAULT)                                      *
*       2=OS/2 Command Reference                             *
*       3=OS/2 Tutorial                                      *
*       4=Rexx Documentation                                 *
*                                                            *
**************************************************************

Documentation=1

**************************************************************
*                                                            *
* DOSSupport                                                 *
*                                                            *
*    Specifies whether or not to install DOS Box.            *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Don't install DOS                                  *
*       1=Install DOS (DEFAULT)                              *
*                                                            *
**************************************************************

DOSSupport=1

**************************************************************
*                                                            *
* WIN-OS/2Support                                            *
*                                                            *
*    Specifies whether or not to install WIN-OS/2            *
*    Environment. If do, select WIN-OS/2 groups or           *
*    other components.  This option is valid only            *
*    when option 1 (DOSSupport) is selected for              *
*    the DOSSupport keyvalue.                            *
*                                                            *
* Valid Parms:                                               *
*                                                            *
*    0=Do NOT install WIN-OS/2                               *
* ---- Followings INSTALL WIN-OS/2 ----------------------    *
*    1=All available groups and components (DEFAULT)         *
*    2=WIN-OS/2 Readme File                                  *
*    3=WIN-OS/2 Accessories Group                            *
*    4=WIN-OS/2 Screen Save Utility                          *
*    5=WIN-OS/2 Sound Utility                                *
*    6=WIN-OS/2 Main and Startup Group ONLY (Minimum support)*
*                                                            *
* Note:                                                      *
*     * WIN-OS/2 Main Group and StartUp Group will be        *
*       installed mandatorily when WIN-OS/2 supported        *
*       ( case 1,2,3,4,5 ).                                  *
*     * Case 6 is minimum WIN-OS/2 support.                  *
*                                                            *
* Example:                                                   *
*                                                            *
*    WIN-OS/2Support=3,4                                     *
*    would install WIN-OS/2 Main Group, StartUp Group and    *
*    WIN-OS/2 Accessories and Screen Save Utility.           *
*                                                            *
**************************************************************

WIN-OS/2Support=1

**************************************************************
*                                                            *
* WIN-OS/2Desktop                                            *
*                                                            *
*    Specifies what the WIN-OS/2 desktop should look like.   *
*    This option is valid only when option 1 (WIN-OS/2       *
*    Support) is selected for the DOSSupport keyvalue.       *
*    Option 1 should be selected only if Windows** currently *
*    exists (two related options follow this one).           *
*    Option 2 should be selected only if WIN-OS/2 has        *
*    previously been installed.                              *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Install standard WIN-OS/2 desktop (DEFAULT)        *
*       1=Copy existing Windows** desktop and use as the     *
*         WIN-OS/2 desktop (two related options follow)      *
*       2=Preserve WIN-OS/2 desktop currently installed      *
*                                                            *
**************************************************************

*WIN-OS/2Desktop=0

**************************************************************
*                                                            *
* ExistingWindowsPath                                        *
*                                                            *
*    Specifies the path to an existing Windows** system.     *
*    This option is valid only when option 1 is selected     *
*    for the WIN-OS/2Desktop keyvalue.                       *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       A string that specifies the path to the existing     *
*       Windows** system (Example: C:\WINDOWS)               *
*                                                            *
**************************************************************

*ExistingWindowsPath=

**************************************************************
*                                                            *
* WindowsInstallSourcePath                                   *
*                                                            *
*    Specifies the path to WIN-OS/2 Diskettes on the CID tree*
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       A string that specifies the path relative to the     *
*       source path where the WIN-OS/2 diskettes reside of the*
*       CID tree (e.g. \WINOS2\DISKETTES and the              *
*       sourcepath=Z:\CURRDRVR would cause the install       *
*       program to look for the windows diskette 1 in the    *
*       Z:\CURRDRVR\WINOS2\DISKETTES\DISK_W1 directory       *
**************************************************************

*WindowsInstallSourcePath=\WINOS2\DISKETTES

**************************************************************
*                                                            *
* ShareDesktopConfigFiles                                    *
*                                                            *
*    Specifies that the desktop configuration files should   *
*    be shared between an existing Windows** system and the  *
*    WIN-OS/2 system being installed.  If this option is     *
*    selected, the Windows** desktop will be updated when    *
*    changes are made to the WIN-OS/2 desktop.  This         *
*    option is valid only when option 1 is selected for the  *
*    WIN-OS/2Desktop keyvalue.                               *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Do not share the Windows** desktop configuration   *
*         files                                              *
*       1=Share the Windows** desktop configuration files    *
*                                                            *
**************************************************************

*ShareDesktopConfigFiles=1

**************************************************************
*                                                            *
* DPMI                                                       *
*                                                            *
*    Specifies which DPMI options to install.                *
*                                                            *
* Valid Parms:                                               *
*                                                            *
*    0=none                                                  *
*    1=All  (DEFAULT)                                        *
*    2=Virtual DOS Protect Mode Interface                    *
*    3=Virtual Expanded Memory Management                    *
*    4=Virtual Extended Memory Support                       *
*                                                            *
**************************************************************

DPMI=1

**************************************************************
*                                                            *
* ExitOnError                                                *
*                                                            *
*    Specifies if the install program should exit with an    *
*    error code if an error occurs.  This also determines    *
*    whether the installation process will exit with a return*
*    code when it completes rather than the C-A-D panel.     *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0 = Do not exit when error occurs; display panel     *
*           (DEFAULT)                                        *
*       1 = Exit quietly with a return code                  *
*                                                            *
**************************************************************

ExitOnError=0

**************************************************************
*                                                            *
* Fonts                                                      *
*                                                            *
*    Specifies which fonts should be installed               *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0 = None                                             *
*       1 = All (DEFAULT)                                    *
*       2 = Courier              (Bitmap)                    *
*       3 = Helvetica            (Bitmap)                    *
*       4 = System Mono-spaced   (Bitmap)                    *
*       5 = Times Roman          (Bitmap)                    *
*       6 = Courier              (Outline)                   *
*       7 = Helvetica            (Outline)                   *
*       8 = Times New Roman      (Outline)                   *
*                                                            *
**************************************************************

Fonts=1

**************************************************************
*                                                            *
* FormatFAT                                                  *
*                                                            *
*    Specifies which drives to format with FAT file system   *
*    This keyword cannot be used in conjunction with the     *
*    BaseFileSystem or FormatPartition keywords.             *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       Drives to format as FAT                              *
*       (Example: C:,D:,E:                                   *
*                                                            *
**************************************************************

* FormatFAT=

**************************************************************
*                                                            *
* FormatHPFS                                                 *
*                                                            *
*    Specifies which drives to format with HPFS file system  *
*    This keyword cannot be used in conjunction with the     *
*    BaseFileSystem or FormatPartition keywords.             *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       Drives to format as HPFS                             *
*       (Example: C:,D:,E:                                   *
*                                                            *
**************************************************************

* FormatHPFS=

**************************************************************
*                                                            *
* FormatPartition                                            *
*                                                            *
*    Specifies whether or not to format the install          *
*    partition.  This keyword cannot be used in conjunction  *
*    with the FormatFAT or FormatHPFS keywords.              *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Do not format (DEFAULT)                            *
*       1=Format                                             *
*                                                            *
**************************************************************

FormatPartition=0

**************************************************************
*                                                            *
* Include                                                    *
*                                                            *
*    For a description of the function of this keyword,      *
*    see IncludeAtEnd which is functionally equivalent       *
*    to this keyword.                                        *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       KEYWORD = valid filename                             *
*                                                            *
**************************************************************

* Include=include.rsp

**************************************************************
*                                                            *
* IncludeAtEnd                                               *
*                                                            *
*    Specifies another response file to process along        *
*    with the current one.  There may be multiple            *
*    occurrences of this keyword.  The "included"            *
*    response file is appended to the end of all             *
*    response files that have been processed before          *
*    this one.                                               *
*                                                            *
*    eg.                                                     *
*     File1.RSP                          Processing          *
*     +------------------------+         ----------          *
*     | IncludeAtEnd=File2.RSP |         Mouse=1             *
*     | IncludeAtEnd=File4.RSP |         Mouse=2             *
*     | Mouse=1                |         Mouse=4             *
*     +------------------------+         Mouse=3             *
*     File2.RSP                                              *
*     +------------------------+                             *
*     | IncludeAtEnd=File3.RSP |                             *
*     | Mouse=2                |                             *
*     +------------------------+                             *
*     File3.RSP                                              *
*     +------------------------+                             *
*     | Mouse=3                |                             *
*     +------------------------+                             *
*     File4.RSP                                              *
*     +------------------------+                             *
*     | Mouse=4                |                             *
*     +------------------------+                             *
*                                                            *
*    No validity checking is done.                           *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       KEYWORD = valid filename                             *
*                                                            *
**************************************************************

* IncludeAtEnd=atend.rsp

**************************************************************
*                                                            *
* IncludeInLine                                              *
*                                                            *
*    Specifies another response file to process along        *
*    with the current one.  There may be multiple            *
*    occurrences of this keyword.  The "included"            *
*    response file is processed immediately when the         *
*    keyword is found.                                       *
*    No validity checking is done.                           *
*                                                            *
*    eg.                                                     *
*     File1.RSP                          Processing          *
*     +-------------------------+        ----------          *
*     | IncludeInLine=File2.RSP |        Mouse=3             *
*     | IncludeInLine=File4.RSP |        Mouse=2             *
*     | Mouse=1                 |        Mouse=4             *
*     +-------------------------+        Mouse=1             *
*     File2.RSP                                              *
*     +-------------------------+                            *
*     | IncludeInLine=File3.RSP |                            *
*     | Mouse=2                 |                            *
*     +-------------------------+                            *
*     File3.RSP                                              *
*     +-------------------------+                            *
*     | Mouse=3                 |                            *
*     +-------------------------+                            *
*     File4.RSP                                              *
*     +-------------------------+                            *
*     | Mouse=4                 |                            *
*     +-------------------------+                            *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       KEYWORD = valid filename                             *
*                                                            *
**************************************************************

* IncludeInLine=inline.rsp

**************************************************************
*                                                            *
* MigrateConfigFiles                                         *
*                                                            *
*    Specifies whether or not to migrate configuration files *
*    from a previous release of the operating system.        *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Don't migrate                                      *
*       1=Migrate files (DEFAULT)                            *
*                                                            *
**************************************************************

MigrateConfigFiles=1

**************************************************************
*                                                            *
* MigrateApplications                                        *
*                                                            *
*    Specifies whether or not to migrate existing DOS,       *
*    Windows** and OS/2 applications.  Only those            *
*    applications listed in the database specified will      *
*    be migrated.                                            *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       Drives to search, database to use for search         *
*       (Example: C:D:,C:\OS2\INSTALL\DATABASE.DAT)          *
*                                                            *
**************************************************************

*MigrateApplications=

**************************************************************
*                                                            *
* Mouse                                                      *
*                                                            *
*    Specifies which mouse device driver, if any, to         *
*    install                                                 *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0 = No pointing device support                       *
*       1 = PS/2 Style Pointing Devicee         (DEFAULT)    *
*       2 = Bus Version                                      *
*       3 = Serial Version                                   *
*       4 = InPort Version                                   *
*       5 = Logitech (tm) 'C' Series Serial Mouse            *
*       6 = IBM PS/2 Touch Display                           *
*       7 = Logitech 'M' Series Mouse                        *
*       8 = PC Mouse Systems (tm) Mouse                      *
*       9 = Other Pointing Device for Mouse Port             *
*                                                            *
**************************************************************

Mouse=1

**************************************************************
*                                                            *
* MousePort                                                  *
*                                                            *
*    Specifies to which port a serial-type mouse should      *
*    be attatched (valid for serial or Logitech(tm) mice)    *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0 = No port necessary (DEFAULT)                      *
*       1 = COM1                                             *
*       2 = COM2                                             *
*       3 = COM3                                             *
*       4 = COM4                                             *
*                                                            *
**************************************************************

MousePort=0

**************************************************************
*                                                            *
*  OptionalSystemUtilities                                   *
*                                                            *
*     Specifies whether or not to install the following      *
*     system utilities.                                      *
*                                                            *
*  Valid Parms:                                              *
*                                                            *
*     0=Install none                                         *
*     1=Install all (DEFAULT)                                *
*     2=Backup Hard Disk                                     *
*     3=Change File Attributes                               *
*     4=Display Directory Tree                               *
*     5=Manage Partitions                                    *
*     6=Label Diskettes                                      *
*     7=Link Object Modules                                  *
*     8=Picture Utilities                                    *
*     9=PMREXX                                               *
*    10=Recover Files                                        *
*    11=Restore Backed-up Files                              *
*    12=Sort Filter                                          *
*    13=Installation Aid                                     *
*    14=Create Utility Diskettes                             *
*    15=Servicability and Diagnostic Aids                    *
*                                                            *
* Example:                                                   *
*          OptionalSystemUtilities=2,9,4                     *
*          would install Backup, PMREXX and Tree utilities.  *
*                                                            *
**************************************************************

OptionalSystemUtilities=1

**************************************************************
*                                                            *
*  OptionalSystemComponents                                  *
*                                                            *
*     Specifies whether or not to install the following      *
*     system components.                                     *
*                                                            *
*  Valid Parms:                                              *
*                                                            *
*     0=Install none                                         *
*     1=Install all (DEFAULT)                                *
*     2=Truemode                                             *
*     3=HPFS                                                 *
*                                                            *
* Example:                                                   *
*          OptionalSystemComponents=3                        *
*          would install the HPFS file system.               *
*                                                            *
**************************************************************

OptionalSystemComponents=1

**************************************************************
*                                                            *
* OS2IniData                                                 *
*                                                            *
*    Specifies a profile string to be written to the         *
*    user configuration file OS2.INI.  There may be          *
*    multiple occurrences of this keyword.                   *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       KEYWORD = /AppName/KeyName/KeyValue/                 *
*                                                            *
*           NOTE: Since each of these names can contain      *
*           imbedded blanks and whitespace, the "slash"      *
*           character must be used as a delimiter.  There    *
*           must be three tokens delineated on all sides or  *
*           this keyword will be ignored.                    *
*                                                            *
**************************************************************

OS2IniData=/AppName/KeyName/KeyValue/

**************************************************************
*                                                            *
* PCMCIA                                                     *
*                                                            *
*    Specifies whether or not to install PCMCIA.             *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Don't install (DEFAULT)                            *
*       1=Ambra486 SN425C                                                         *
*       2=AmbraTS30AS                                                             *
*       3=ASTAscentia 800N                                                        *
*       4=ASTAscentia 900N                                                        *
*       5=ASTBravo                                                                *
*       6=ASTPowerExec                                                            *
*       7=AustinBusiness Audio 4/75 Dual Scan                                     *
*       8=AustinDSTN                                                              *
*       9=CompaqConcerto                                                          *
*       10=CompaqContura,Contura 410,Contura 420                                  *
*       11=CompaqLTE Elite, LTE Elite 4/40C, LTE Elite 4/75CX, LTE Elite 4/75CXL  *
*       12=Compuadd425TX                                                          *
*       13=DELLLatitude                                                           *
*       14=DELLLatitude XP                                                        *
*       15=IBMThinkPad 230                                                        *
*       16=IBMThinkPad 340/CSE                                                    *
*       17=IBMThinkPad 350                                                        *
*       18=IBMThinkPad 355/C/CS 360/C/CE/CS/CSE/P/PE                              *
*       19=IBMThinkPad 365X/XD/E/ED/C/CD/CS/CSD                                   *
*       20=IBMThinkPad 370C                                                       *
*       21=IBMThinkPad 500                                                        *
*       22=IBMThinkPad 510                                                        *
*       23=IBMThinkPad 530CS                                                      *
*       24=IBMThinkPad 560                                                        *
*       25=IBMThinkPad 701C                                                       *
*       26=IBMThinkPad 710T                                                       *
*       27=IBMThinkPad 720/C                                                      *
*       28=IBMThinkPad 730T                                                       *
*       29=IBMThinkPad 750/C/CS                                                   *
*       30=IBMThinkPad 750CE                                                      *
*       31=IBMThinkPad 755C/CS                                                    *
*       32=IBMThinkPad 755CD/CDV                                                  *
*       33=IBMThinkPad 755CE/CSE/CV/CX                                            *
*       34=IBMThinkPad 760C/CD                                                    *
*       35=IBMThinkPad 760E                                                       *
*       36=IBMThinkPad 760ED                                                      *
*       37=IBMThinkPad 760EL/ELD                                                  *
*       38=IBMThinkPad 760X/XD                                                    *
*       39=IBMPS/2 E                                                              *
*       40=LexbookGS40C                                                           *
*       41=Matsushita                                                             *
*       42=NCRSafari                                                              *
*       43=NECVersa                                                               *
*       44=Panasonic                                                              *
*       45=ToshibaT1960CS/CT                                                      *
*       46=ToshibaT200CD\80 PEN                                                   *
*       47=ToshibaT2100CT                                                         *
*       48=ToshibaT2130CS/CT                                                      *
*       49=ToshibaT2400CS/CT                                                      *
*       50=ToshibaT3400CT                                                         *
*       51=ToshibaT3600/T3600CT/200 Portege                                       *
*       52=ToshibaT4500                                                           *
*       53=ToshibaT4600                                                           *
*       54=ToshibaT4700                                                           *
*       55=ToshibaT4800                                                           *
*       56=ToshibaT4850CT                                                         *
*       57=ToshibaT4900CT                                                         *
*       58=ToshibaT610CT Portege                                                  *
*       59=ToshibaT6600C                                                          *
*       60=Zeos                                                                   *
*       61=ZeosMeridian                                                           *
*       62=ZenithZ-lite 425L                                                      *
*       63=INTELPCIC                                                              *
*       64=DATABOOKTCIC                                                           *
*                                                            *
**************************************************************

PCMCIA=0

**************************************************************
*                                                            *
* PCMCIAOptions                                              *
*                                                            *
*    Specifies whether or not to install PCMCIA options.     *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Don't install                                      *
*       1=Install all                                        *
*       2=Modem/FAX services (DEFAULT)                       *
*       3=Hard disk services                                 *
*       4=FLASH services                                     *
*                                                            *
**************************************************************

PCMCIAOptions=2

**************************************************************
*                                                            *
* Optical                                                    *
*                                                            *
*    Specifies whether or not to install SCSI II Optical     *
*    Device Support                                          *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Don't install (DEFAULT)                            *
*       1=Install                                            *
*                                                            *
**************************************************************

Optical=0

**************************************************************
*                                                            *
* Infrared                                                   *
*                                                            *
*    Specifies whether or not to install Infrared Port       *
*    Support                                                 *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Don't install (DEFAULT)                            *
*       1=Install                                            *
*                                                            *
**************************************************************

Infrared=0

**************************************************************
*                                                            *
* ExternalFloppy                                             *
*                                                            *
*    Specifies whether or not to install Support for an      *
*    External Floppy Drive for a laptop                      *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Don't install (DEFAULT)                            *
*       1=Install                                            *
*                                                            *
**************************************************************

HOTPLUG.Selection=0

**************************************************************
*                                                            *
* UltraBay Device Swapping                                   *
*                                                            *
*    Specifies whether or not to install Support for floppy  *
*    and CDROM Swapping for UltraBay devices on an IBM       *
*    Thinkpad                                                *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Don't install (DEFAULT)                            *
*       1=Install                                            *
*                                                            *
**************************************************************

WARMPLUG.Selection=0

**************************************************************
*                                                            *
* Dock II Configuration Manager Support                      *
*                                                            *
*    Specifies whether or not to install Support for         *
*    Dock II docking station for an IBM Thinkpad.            *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Don't install (DEFAULT)                            *
*       1=Install                                            *
*                                                            *
**************************************************************

WARMDOCK.Selection=0

**************************************************************
*                                                            *
* PrimaryCodePage                                            *
*                                                            *
*    Specifies whether "national" or "multi-lingual" code    *
*    page is primary (first active code page before          *
*    switching).                                             *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       1=National (DEFAULT)                                 *
*       2=Multilingual                                       *
*                                                            *
**************************************************************

PrimaryCodePage=1

**************************************************************
*                                                            *
* PrinterPort                                                *
*                                                            *
*    Specifies to which printer port the default printer     *
*    should be attached                                      *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       1=LPT1 (DEFAULT)                                     *
*       2=LPT2                                               *
*       3=LPT3                                               *
*       4=COM1                                               *
*       5=COM2                                               *
*       6=COM3                                               *
*       7=COM4                                               *
*                                                            *
**************************************************************

PrinterPort=1

**************************************************************
*                                                            *
* ProcessEnvironment                                         *
*                                                            *
*    Each of the Keyword/Keyvalue statements specified in    *
*    this response file may be added to the environment as   *
*    environment variables.                                  *
*    This makes it possible for user programs, batch files,  *
*    etc. (UserExit) to access response file settings.       *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0 = Do not add keyword/keyvalue statements specified *
*           in this response file to environment.            *
*       1 = Add all keyword/keyvalue statements specified    *
*           in this response file to environment (DEFAULT).  *
*                                                            *
**************************************************************

ProcessEnvironment=1

**************************************************************
*                                                            *
*  ProgressIndication                                        *
*                                                            *
*    Specifies whether or not to display progress indicators *
*    during the installation.  Disabling this will allow a   *
*    frontend program to display something else while we do  *
*    our job in an unattended environment.                   *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0 = No progress indication                           *
*       1 = Progress indication (DEFAULT)                    *
*                                                            *
**************************************************************

ProgressIndication=1

**************************************************************
*                                                            *
* RebootRequired                                             *
*                                                            *
*    Specifies if the machine should be automatically        *
*    warm booted when installation is complete.  This is     *
*    ignored if the ExtendedInstall response is specified.   *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Ask user to reboot (DEFAULT)                       *
*       1=Auto-reboot                                        *
*                                                            *
**************************************************************

RebootRequired=0

**************************************************************
*                                                            *
* SCSI                                                       *
*                                                            *
*    Specifies which, if any, CD ROM adapter support you     *
*    wish to install support for.                            *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0 = None                                             *
*       1 = Autodetect                                       *
*       2=Adaptec1460,1510,152X,AIC6260,6360                                      *
*       3=Adaptec154X,174X FAST SCSI                                              *
*       4=Adaptec1640 MCA SCSI                                                    *
*       5=Adaptec174X EISA SCSI                                                   *
*       6=Adaptec274X,284X,AIC 7770 FAST SCSI                                     *
*       7=Adaptec294X,394X, AIC 7870 PCI SCSI                                     *
*       8=AdaptecAPA 348, Trantor T348 MiniSCSI Parallel                          *
*       9=AdaptecAPA 358, Trantor T358 MiniSCSI EPP Parallel                      *
*       10=BusLogicBusMaster SCSI Adapters                                        *
*       11=BusLogicFlashpoint LT, LW, DL                                          *
*       12=DPTPM2XXX,PM32XX SmartCache,SmartRAID                                  *
*       13=FutureDomain TMC8XXM,TMC950                                            *
*       14=FutureDomain TMC3260,MCS600,700,TMC-16XX,17XX,1800                     *
*       15=FutureDomain 7000EX EISA SCSI                                          *
*       16=IBMPC ServeRAID Adapter                                                *
*       17=IBMPS/2 SCSI Adapter                                                   *
*       18=IBMSCSI II RAID Adapter                                                *
*       19=IBM16-Bit AT Fast SCSI Adapter                                         *
*       20=MylexDAC 960 RAID Adapter                                              *
*       21=ProAudioSpectrum 16 / Trantor SCSI                                     *
*       22=QLogicQLA400 Adapter                                                   *
*       23=QLogicQLA510 Adapter                                                   *
*       24=QLogicQLA1000 Adapter                                                  *
*       25=TrantorT128/T228 SCSI Adapter                                          *
*       26=TrantorT130B 8 Bit SCSI Adapter                                        *
*       27=TrantorT160/T260 16 Bit SCSI Adapter                                   *
*       28=TrantorT338 MiniSCSI Parallel Port Adapter                             *
*                                                            *
**************************************************************

SCSI=1

**************************************************************
*                                                            *
* SerialDeviceSupport                                        *
*                                                            *
*    Specifies whether or not to install the serial          *
*    device driver.                                          *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0=Don't install                                      *
*       1=Install (DEFAULT)                                  *
*                                                            *
**************************************************************

SerialDeviceSupport=1

**************************************************************
*                                                            *
* SourcePath                                                 *
*                                                            *
*    Specifies a single media (no disk switching) that should*
*    be used as a source drive and directory from which to   *
*    install.                                                *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       KEYVALUE=drive and optional path (D:\OS2SE20\...)    *
*                DEFAULT=A:\                                 *
*                                                            *
**************************************************************

* SourcePath=D:\os2se20

**************************************************************
*                                                            *
* TargetDrive                                                *
*                                                            *
*    Specifies the target drive to which OS/2 should be      *
*    installed.  This drive is assumed to be a valid         *
*    partition.  If a partition other than C: is specified,  *
*    it is assumed that MOST support is already installed to *
*    enable booting an operating system from any partition.  *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       KEYVALUE=d:                                          *
*                                                            *
*          where "d:" is a valid partition that OS/2 may be  *
*          installed to.                                     *
*                DEFAULT=first acceptable partition          *
*                                                            *
**************************************************************

TargetDrive=C:

**************************************************************
*                                                            *
* WIN-OS/2TargetDrive                                        *
*                                                            *
*    Specifies which valid partition drive to install        *
*    WIN-OS/2.                                               *
*                                                            *
* Valid Parms:  any valid FORMATTED partition.               *
*                                                            *
*        C: (DEFAULT)                                        *
*        D:                                                  *
*        .                                                   *
*        .                                                   *
*                                                            *
*        Z:                                                  *
*                                                            *
* Example:                                                   *
*                                                            *
*    WIN-OS/2TargetDrive=D:                                  *
*    would install WIN-OS/2 to partition D: located in       *
*    \OS2\MDOS\WINOS2                                        *
*                                                            *
**************************************************************

*WIN-OS/2TargetDrive=C:


**************************************************************
*                                                            *
*  ToolsAndGames                                             *
*                                                            *
*     Specifies whether or not to install tools and games    *
*     such as editors and jigsaw.                            *
*                                                            *
*  Valid Parms:                                              *
*                                                            *
*     0=Install none                                         *
*     1=Install all (DEFAULT)                                *
*     2=Enhanced Editor                                      *
*     3=Search and Scan Tool                                 *
*     4=Optional Bit Maps                                    *
*     5=Solitaire - Klondike                                 *
*     6=Pulse                                                *
*     7=Chess                                                *
*     8=Mahjongg Solitaire                                   *
*                                                            *
* Example:                                                   *
*          ToolsAndGames=2,5,6                               *
*          would install the Enhanced Editor, Pulse and      *
*          Chess.                                            *
*                                                            *
**************************************************************

ToolsAndGames=1

**************************************************************
*                                                            *
* ConfigSysLine                                              *
*                                                            *
*    Specifies a text line to be appended to CONFIG.SYS.     *
*    There may be multiple occurrences of this keyword.      *
*    No validity checking is done.                           *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       KEYWORD = a valid CONFIG.SYS statement               *
*                                                            *
**************************************************************

* ConfigSysLine=REM This is a CONFIG.SYS remark line.

**************************************************************
*                                                            *
* Copy                                                       *
*                                                            *
*    Specifies a source file and destination directory       *
*    of a file to be copied during install.  Errors are      *
*    ignored, though they will be logged.  Packed files      *
*    are acceptable since UNPACK will do the copy.           *
*    There may be multiple occurrences of this keyword.      *
*    No validity checking is done.                           *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       KEYWORD= source file destination                     *
*                                                            *
*         where source file = valid filename                 *
*           and destination = valid directory name           *
*                                                            *
*         ex: Copy = readme.dat  c:\os2                      *
*                                                            *
**************************************************************

* Copy=vga c:\ /n:ini.rc

**************************************************************
*                                                            *
*  EarlyUserExit                                             *
*                                                            *
*    Specifies the name of a program that Install will       *
*    DosExec after the target drive is prepared.  Install    *
*    waits for the program to return.  This keyword may occur*
*    more than once.  Each will be executed in the order that*
*    they appear at the end of OS/2 Install.  The only       *
*    difference between this keyword and the UserExit keyword*
*    is that this one is executed early in the installation  *
*    process while the latter is executed at the very end.   *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       KEYVALUE=user exit program name (DEFAULT=none)       *
*                                                            *
**************************************************************

* EarlyUserExit=T c:\config.sys

**************************************************************
*                                                            *
* ExtendedInstall                                            *
*                                                            *
*    Specifies program to be run asynchronously while SE     *
*    Install DosExits                                        *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       KEYVALUE=full pathname of program                    *
*       (DEFAULT=none)                                       *
*                                                            *
**************************************************************

* ExtendedInstall=PROGRAM.EXE

**************************************************************
*                                                            *
*  SeedConfigSysLine                                         *
*                                                            *
*    Specifies a text line to be appended to the CONFIG.SYS  *
*    written to the seed system from which PM Install boots. *
*    This will allow device drivers (that may be required) to*
*    become part of that seed system.                        *
*    There may be multiple occurrences of this keyword.      *
*    No validity checking is done.                           *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       KEYWORD = a valid CONFIG.SYS statement               *
*                                                            *
**************************************************************

* SeedConfigSysLine=REM This is a remark line in the seed CONFIG.SYS.

**************************************************************
*                                                            *
* UserExit                                                   *
*                                                            *
*    Specifies the name of a program that Install will       *
*    DosExec before exiting memory.  Install waits for the   *
*    program to return.  This keyword may occur more than    *
*    once.  Each will be executed in the order that they     *
*    appear at the end of OS/2 Install.                      *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       KEYVALUE=user exit program name (DEFAULT=none)       *
*                                                            *
**************************************************************

* UserExit=T.EXE C:\OS2\INSTALL\INSTALL.LOG

**************************************************************
*                                                            *
* DDInstall                                                  *
*    Use OS/2 Device Driver Installation to install external *
*    loadable device drivers. A Device Driver Profile ( a    *
*    text file with a .DDP file name extension)  must be     *
*    provided by the device driver author to control the     *
*    installation of the device driver.                      *
*                                                            *
*    Valid Parms:                                            *
*       DDISrc =  Directory where the .DDP files are.        *
*       DDIDest = Directory where to copy the device driver  *
*                 files.                                     *
*       DDIDDP =  List of .DDP files to install.             *
*                 (example: file1.DDP,file2.DDP)             *
*                                                            *
*                                                            *
**************************************************************

*DDISrc  = Z:\DDP
*DDIDest = C:\
*DDIDDP  = *.DDP

**************************************************************
*                                                            *
*  Multimedia Support                                        *
*                                                            *
*    Specifies whether or not to install multimedia files    *
*    during the installation.                                *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0 = do NOT install multimedia support                *
*       1 = install multimedia support (DEFAULT)             *
*                                                            *
**************************************************************

MultimediaSupport=1

**************************************************************
*                                                            *
*  AskPSP Installation                                       *
*                                                            *
*    Specifies whether or not to install AskPSP support      *
*    during the installation.                                *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0 = do NOT install AskPSP support                    *
*       1 = install AskPSP support (DEFAULT)                 *
*                                                            *
**************************************************************

BPASKPSP.Selection=1
BPASKPSP.TarDrv=C:

**************************************************************
*                                                            *
*  Compuserve                                                *
*                                                            *
*    Specifies whether or not to install Compuserve files    *
*    during the installation.                                *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0 = do NOT install Compuserve files                  *
*       1 = install Compuserve files (DEFAULT)               *
*                                                            *
**************************************************************

BPCIM.Selection=1
BPCIM.TarDrv=C:

**************************************************************
*                                                            *
*  FaxWorks                                                  *
*                                                            *
*    Specifies whether or not to install FaxWorks files      *
*    during the installation.                                *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0 = do NOT install FaxWorks files                    *
*       1 = install FaxWorks files (DEFAULT)                 *
*                                                            *
**************************************************************

BPFAXWORKS.Selection=1
BPFAXWORKS.TarDrv=C:

*****************************************************************
*                                                               *
*  HyperAccess Lite                                             *
*                                                               *
*    Specifies whether or not to install HyperAccess Lite files *
*    during the installation.                                   *
*                                                               *
*    Valid Parms:                                               *
*                                                               *
*       0 = do NOT install HyperAccess Lite files               *
*       1 = install HyperAccess Lite files (DEFAULT)            *
*                                                               *
*****************************************************************

BPHAL.Selection=1
BPHAL.TarDrv=C:

**************************************************************
*                                                            *
*  IBM Works                                                 *
*                                                            *
*    Specifies whether or not to install IBM Works files     *
*    during the installation.                                *
*                                                            *
*    Valid Parms:                                            *
*                                                            *
*       0 = do NOT install IBM Works files                   *
*       1 = install IBM Works files (DEFAULT)                *
*                                                            *
**************************************************************

BPIBMWORKS.Selection=1
BPIBMWORKS.TarDrv=C:

***************************************************************
*                                                             *
*  Remote Support                                             *
*                                                             *
*    Specifies whether or not to install Remote Support files *
*    during the installation.                                 *
*                                                             *
*    Valid Parms:                                             *
*                                                             *
*       0 = do NOT install Remote Support files               *
*       1 = install Remote Support files (DEFAULT)            *
*                                                             *
***************************************************************

BPRS2.Selection=1
BPRS2.TarDrv=C:

***************************************************************
*                                                             *
*  VideoIn Support                                            *
*                                                             *
*    Specifies whether or not to install VideoIn files        *
*    during the installation.                                 *
*                                                             *
*    Valid Parms:                                             *
*                                                             *
*       0 = do NOT install VideoIn files                      *
*       1 = install VideoIn files (DEFAULT)                   *
*                                                             *
***************************************************************

BPVIDEOIN.Selection=1
BPVIDEOIN.TarDrv=C:

*****************************************************************
*                                                               *
*  Jet Admin Client Support                                     *
*                                                               *
*    Specifies whether or not to install Jet Admin Client files *
*    during the installation.                                   *
*                                                               *
*    Valid Parms:                                               *
*                                                               *
*       0 = do NOT install Jet Admin Client files (DEFAULT)     *
*       1 = install Jet Admin Client files                      *
*                                                               *
*****************************************************************

BPHPJETCLIENT.Selection=0
BPHPJETCLIENT.TarDrv=C:

*****************************************************************
*                                                               *
*  Jet Admin Server Support                                     *
*                                                               *
*    Specifies whether or not to install Jet Admin Server files *
*    during the installation.                                   *
*                                                               *
*    Valid Parms:                                               *
*                                                               *
*       0 = do NOT install Jet Admin Server files (DEFAULT)     *
*       1 = install Jet Admin Server files                      *
*                                                               *
*****************************************************************

BPHPJETSERVER.Selection=0
BPHPJETSERVER.TarDrv=C:

********************************************************************
*                                                                  *
*  MarkNet Port Driver Support                                     *
*                                                                  *
*    Specifies whether or not to install MarkNet Port Driver files *
*    during the installation.                                      *
*                                                                  *
*    Valid Parms:                                                  *
*                                                                  *
*       0 = do NOT install MarkNet Port Driver files (DEFAULT)     *
*       1 = install MarkNet Port Driver files                      *
*                                                                  *
********************************************************************

BPMARKNET.Selection=0
BPMARKNET.TarDrv=C:

***********************************************************
*                                                         *
*  MarkVision Support                                     *
*                                                         *
*    Specifies whether or not to install MarkVision files *
*    during the installation.                             *
*                                                         *
*    Valid Parms:                                         *
*                                                         *
*       0 = do NOT install MarkVision files (DEFAULT)     *
*       1 = install MarkVision files                      *
*                                                         *
***********************************************************

BPMARKVIS.Selection=0
BPMARKVIS.TarDrv=C: