SCOUG Logo


Next Meeting: Sat, TBD
Meeting Directions


Be a Member
Join SCOUG

Navigation:


Help with Searching

20 Most Recent Documents
Search Archives
Index by date, title, author, category.


Features:

Mr. Know-It-All
Ink
Download!










SCOUG:

Home

Email Lists

SIGs (Internet, General Interest, Programming, Network, more..)

Online Chats

Business

Past Presentations

Credits

Submissions

Contact SCOUG

Copyright SCOUG



warp expowest
Pictures from Sept. 1999

The views expressed in articles on this site are those of their authors.

warptech
SCOUG was there!


Copyright 1998-2024, Southern California OS/2 User Group. ALL RIGHTS RESERVED.

SCOUG, Warp Expo West, and Warpfest are trademarks of the Southern California OS/2 User Group. OS/2, Workplace Shell, and IBM are registered trademarks of International Business Machines Corporation. All other trademarks remain the property of their respective owners.

The Southern California OS/2 User Group
USA

SCOUG-HELP Mailing List Archives

Return to [ 12 | July | 2004 ]

>> Next Message >>


Date: Mon, 12 Jul 2004 00:11:02 PDT7
From: "Bob" <2lvvuss02@sneakemail.com >
Reply-To: scoug-help@scoug.com
To: scoug-help@scoug.com
Subject: SCOUG-Help: Thinkpad T41 install


9
=====================================================
If you are responding to someone asking for help who
may not be a member of this list, be sure to use the
REPLY TO ALL feature of your email program.
=====================================================
This is a multipart message in MIME format. If you can read this
paragraph, your mail program probably does not support MIME messages,
and you may not be able to receive the contents of this message in
the format intended by the sender.

Content Type: text/plain

Steven, here is the output from the PCI sniffer (attached).

I have installed eCS version 1.1. I thought this was not going to be too hard
without a floppy diskette drive since I had a memory stick BUT. I could not
get eCS to access the memory stick or the LAN since eCS 1.1 did not recognize
either of the NICs on this machine. I created a FAT partition using XP copied
the data to the FAT drive, booted eCS ran the PCI program, booted XP to copy
the output back to the gateway machine so I could email it. I now have the
memory stick working so things will be easier form now on (I hope).

So a few questions now that I have gotten this far.

Are there drivers for either NIC?

Is the modem a win modem? If it is I will need to get a PC card modem that eCS
understands.

I have 4 "BASEDEV=USBEHCD.SYS" statements which implies, to me, that there are
four USB controllers. I only have two USB connectors on the machine. Can I
delete two of these?


Content Type: text/plain

Content-Transfer-Encoding: quoted-printable
Content-Disposition: attachment; filename="PCIOUT.TXT"

Craig Hart's PCI+AGP bus sniffer, version 0.48vkF, freeware made in 1996-20=
04.=0D
Loaded Vendor Data : "This is version 479 of this file; 07-07-2004 (D-M-Y).=
"=0D
=0D
PCI BIOS Version 2.10 found!=0D
Number of PCI Busses : 9=0D
PCI Characteristics : Config Mechanism 1 =0D
=0D
Searching for PCI Devices using the OEMHLP$ driver=0D
=0D
Vendor 8086h Intel Corporation=0D
Device 3340h 82855PM Odem Host-Hub Interface Bridge=0D
Command 0106h (Memory Access, BusMaster, System Errors)=0D
Status 2090h (Has Capabilities List, Supports Back-To-Back Trans., Receive=
d Master Abort, Fast Timing)=0D
Revision 03h, Header Type 00h, Bus Latency 00h=0D
Self test 00h (Self test not supported)=0D
PCI Class Bridge, type PCI to HOST=0D
Subsystem ID 05291014h Unknown=0D
Subsystem Vendor 1014h IBM=0D
Address 0 is a Memory Address (anywhere in 0-4GiB, Prefetchable) : D000000=
0h=0D
New Capabilities List Present:=0D
Vendor-Dependant Capability=0D
AGP Capability, Version 2.0 (AGP 4x and below support)=0D
AGP Speed(s) Supported : 1x 2x 4x =0D
FW Transfers Supported : Yes=0D
>4GiB Address Space Supported : No=0D
Sideband Addressing Supported : Yes=0D
Maximum Command Queue Length : 32 bytes=0D
AGP Speed Selected : 1x =0D
FW Transfers Enabled : No=0D
>4GiB Address Space Enabled : No=0D
AGP Enabled : No=0D
Sideband Addressing Enabled : No=0D
Current Command Queue Length : 1 byte=0D
=0D
Vendor 8086h Intel Corporation=0D
Device 3341h 82855PM Odem AGP Bridge=0D
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)=0D
Status 00A0h (Supports 66MHz, Supports Back-To-Back Trans., Fast Timing)=
=0D
Revision 03h, Header Type 01h, Bus Latency 60h=0D
Self test 00h (Self test not supported)=0D
PCI Class Bridge, type PCI to PCI=0D
PCI Bridge Information:=0D
Primary Bus Number 0, Secondary Bus Number 1, Subordinate bus number 1=
=0D
Secondary Bus Command 000Ch (ISA mapping, VGA mapping)=0D
Secondary Bus Status 22A0h (Supports 66MHz, Supports Back-To-Back Trans=
., Received Master Abort, Medium Timing)=0D
Secondary Bus Latency 40h=0D
I/O Port Range Passed to Secondary Bus : 3000h to 3FFFh (16-bit)=0D
Memory Range Passed to Secondary Bus : C0100000h to C01FFFFFh=0D
Prefectchable Memory Range Passed to Secondary Bus : E0000000h to E7FFFF=
FFh=0D
=0D
Vendor 8086h Intel Corporation=0D
Device 24C2h 82801DB/DBL USB UHCI Controller #1 (ICH4/ICH4-L A1 step)=0D
Command 0005h (I/O Access, BusMaster)=0D
Status 0280h (Supports Back-To-Back Trans., Medium Timing)=0D
Revision 01h, Header Type 80h, Bus Latency 00h=0D
Self test 00h (Self test not supported)=0D
PCI Class Serial, type USB (UHCI)=0D
Subsystem ID 052D1014h Unknown=0D
Subsystem Vendor 1014h IBM=0D
Address 4 is an I/O Port : 00001800h=0D
System IRQ 11, INT# A=0D
=0D
Vendor 8086h Intel Corporation=0D
Device 24C4h 82801DB/DBL USB UHCI Controller #2 (ICH4/ICH4-L A1 step)=0D
Command 0005h (I/O Access, BusMaster)=0D
Status 0280h (Supports Back-To-Back Trans., Medium Timing)=0D
Revision 01h, Header Type 00h, Bus Latency 00h=0D
Self test 00h (Self test not supported)=0D
PCI Class Serial, type USB (UHCI)=0D
Subsystem ID 052D1014h Unknown=0D
Subsystem Vendor 1014h IBM=0D
Address 4 is an I/O Port : 00001820h=0D
System IRQ 11, INT# B=0D
=0D
Vendor 8086h Intel Corporation=0D
Device 24C7h 82801DB/DBL USB UHCI Controller #3 (ICH4/ICH4-L A1 step)=0D
Command 0005h (I/O Access, BusMaster)=0D
Status 0280h (Supports Back-To-Back Trans., Medium Timing)=0D
Revision 01h, Header Type 00h, Bus Latency 00h=0D
Self test 00h (Self test not supported)=0D
PCI Class Serial, type USB (UHCI)=0D
Subsystem ID 052D1014h Unknown=0D
Subsystem Vendor 1014h IBM=0D
Address 4 is an I/O Port : 00001840h=0D
System IRQ 11, INT# C=0D
=0D
Vendor 8086h Intel Corporation=0D
Device 24CDh 82801DB/DBL USB EHCI Controller (ICH4/ICH4-L A1 step)=0D
Command 0106h (Memory Access, BusMaster, System Errors)=0D
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium =
Timing)=0D
Revision 01h, Header Type 00h, Bus Latency 00h=0D
Self test 00h (Self test not supported)=0D
PCI Class Serial, type USB 2.0 (EHCI)=0D
Subsystem ID 052E1014h Unknown=0D
Subsystem Vendor 1014h IBM=0D
Address 0 is a Memory Address (anywhere in 0-4GiB) : C0000000h=0D
System IRQ 11, INT# D=0D
New Capabilities List Present:=0D
Power Management Capability, Version 1.1=0D
Does not support low power State D1 or D2=0D
current requirement for 3.3Vaux: 375 mA=0D
Supports PME# from mode(s) D0, D3hot, D3cold=0D
Current Power State : D0 (Device operational, no power saving)=0D
Debug Port Capability=0D
=0D
Vendor 8086h Intel Corporation=0D
Device 2448h 82801BAM/CAM/DBM (ICH2-M/3-M/4-M) Hub Interface to PCI Bridge=
=0D
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)=0D
Status 8080h (Supports Back-To-Back Trans., Detected Parity Error, Fast Ti=
ming)=0D
Revision 81h, Header Type 01h, Bus Latency 00h=0D
Self test 00h (Self test not supported)=0D
PCI Class Bridge, type PCI to PCI=0D
PCI Bridge Information:=0D
Primary Bus Number 0, Secondary Bus Number 2, Subordinate bus number 8=
=0D
Secondary Bus Command 0004h (ISA mapping)=0D
Secondary Bus Status 2280h (Supports Back-To-Back Trans., Received Mast=
er Abort, Medium Timing)=0D
Secondary Bus Latency 40h=0D
I/O Port Range Passed to Secondary Bus : 4000h to 8FFFh (16-bit)=0D
Memory Range Passed to Secondary Bus : C0200000h to CFFFFFFFh=0D
Prefectchable Memory Range Passed to Secondary Bus : E8000000h to EFFFFF=
FFh=0D
=0D
Vendor 8086h Intel Corporation=0D
Device 24CCh 82801DBM (ICH4-M) LPC Interface Bridge=0D
Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles)=0D
Status 0280h (Supports Back-To-Back Trans., Medium Timing)=0D
Revision 01h, Header Type 80h, Bus Latency 00h=0D
Self test 00h (Self test not supported)=0D
PCI Class Bridge, type PCI to ISA=0D
=0D
Vendor 8086h Intel Corporation=0D
Device 24CAh 82801DBM (ICH4-M) UltraATA/100 EIDE Controller=0D
Command 0007h (I/O Access, Memory Access, BusMaster)=0D
Status 0280h (Supports Back-To-Back Trans., Medium Timing)=0D
Revision 01h, Header Type 00h, Bus Latency 00h=0D
Self test 00h (Self test not supported)=0D
PCI Class Storage, type IDE=0D
PCI EIDE Controller Features :=0D
BusMaster EIDE is supported=0D
Primary Channel is at I/O Port 01F0h and IRQ 14=0D
Secondary Channel is at I/O Port 0170h and IRQ 15=0D
Subsystem ID 052D1014h Unknown=0D
Subsystem Vendor 1014h IBM=0D
Address 0 is an I/O Port : 00000000h=0D
Address 1 is an I/O Port : 00000000h=0D
Address 2 is an I/O Port : 00000000h=0D
Address 3 is an I/O Port : 00000000h=0D
Address 4 is an I/O Port : 00001860h=0D
System IRQ (disabled), INT# A=0D
=0D
Vendor 8086h Intel Corporation=0D
Device 24C3h 82801DB/DBL SMBus Controller (ICH4/ICH4-L A1 step)=0D
Command 0001h (I/O Access)=0D
Status 0280h (Supports Back-To-Back Trans., Medium Timing)=0D
Revision 01h, Header Type 00h, Bus Latency 00h=0D
Self test 00h (Self test not supported)=0D
PCI Class Serial, type SMBus Controller=0D
Subsystem ID 052D1014h Unknown=0D
Subsystem Vendor 1014h IBM=0D
Address 4 is an I/O Port : 00001880h=0D
System IRQ 11, INT# B=0D
=0D
Vendor 8086h Intel Corporation=0D
Device 24C5h 82801DB/DBL AC'97 Audio Controller (ICH4/ICH4-L A1 step)=0D
Command 0007h (I/O Access, Memory Access, BusMaster)=0D
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium =
Timing)=0D
Revision 01h, Header Type 00h, Bus Latency 00h=0D
Self test 00h (Self test not supported)=0D
PCI Class Multimedia, type Audio=0D
Subsystem ID 05371014h Unknown=0D
Subsystem Vendor 1014h IBM=0D
Address 0 is an I/O Port : 00001C00h=0D
Address 1 is an I/O Port : 000018C0h=0D
Address 2 is a Memory Address (anywhere in 0-4GiB) : C0000C00h=0D
Address 3 is a Memory Address (anywhere in 0-4GiB) : C0000800h=0D
System IRQ 11, INT# B=0D
New Capabilities List Present:=0D
Power Management Capability, Version 1.1=0D
Does not support low power State D1 or D2=0D
current requirement for 3.3Vaux: 375 mA=0D
Supports PME# from mode(s) D0, D3hot, D3cold=0D
Current Power State : D0 (Device operational, no power saving)=0D
=0D
Vendor 8086h Intel Corporation=0D
Device 24C6h 82801DB/DBL AC'97 Modem Controller (ICH4/ICH4-L A1 step)=0D
Command 0005h (I/O Access, BusMaster)=0D
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium =
Timing)=0D
Revision 01h, Header Type 00h, Bus Latency 00h=0D
Self test 00h (Self test not supported)=0D
PCI Class Simple Communication, type Hayes Compatible Modem=0D
Subsystem ID 05241014h Unknown=0D
Subsystem Vendor 1014h IBM=0D
Address 0 is an I/O Port : 00002400h=0D
Address 1 is an I/O Port : 00002000h=0D
System IRQ 11, INT# B=0D
New Capabilities List Present:=0D
Power Management Capability, Version 1.1=0D
Does not support low power State D1 or D2=0D
current requirement for 3.3Vaux: 375 mA=0D
Supports PME# from mode(s) D0, D3hot, D3cold=0D
Current Power State : D0 (Device operational, no power saving)=0D
=0D
Vendor 1002h ATI Technologies=0D
Device 4C57h Radeon Mobility M7 LW=0D
Command 0387h (I/O Access, Memory Access, BusMaster, Wait Cycles, System E=
rrors, Back-To-Back Transactions)=0D
Status 02B0h (Has Capabilities List, Supports 66MHz, Supports Back-To-Back=
Trans., Medium Timing)=0D
Revision 00h, Header Type 00h, Bus Latency 42h=0D
Self test 00h (Self test not supported)=0D
Cache line size 32 Bytes (8 DWords)=0D
PCI Class Display, type VGA=0D
Subsystem ID 05301014h Radeon Mobility (Guess Only!)=0D
Subsystem Vendor 1014h IBM=0D
Address 0 is a Memory Address (anywhere in 0-4GiB, Prefetchable) : E000000=
0h=0D
Address 1 is an I/O Port : 00003000h=0D
Address 2 is a Memory Address (anywhere in 0-4GiB) : C0100000h=0D
System IRQ 11, INT# A=0D
Expansion ROM of 128 KiB decoded by this card, currently disabled=0D
New Capabilities List Present:=0D
AGP Capability, Version 2.0 (AGP 4x and below support)=0D
AGP Speed(s) Supported : 1x 2x 4x =0D
FW Transfers Supported : No=0D
>4GiB Address Space Supported : No=0D
Sideband Addressing Supported : Yes=0D
Maximum Command Queue Length : 48 bytes=0D
AGP Speed Selected : None Selected=0D
FW Transfers Enabled : No=0D
>4GiB Address Space Enabled : No=0D
AGP Enabled : No=0D
Sideband Addressing Enabled : Yes=0D
Current Command Queue Length : 1 byte=0D
Power Management Capability, Version 1.1=0D
Supports low power State D1=0D
Supports low power State D2=0D
Does not support PME# signalling=0D
Current Power State : D0 (Device operational, no power saving)=0D
=0D
Vendor 104Ch Texas Instruments (TI)=0D
Device AC46h PCI4520 PC card CardBus Controller=0D
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)=0D
Status 0210h (Has Capabilities List, Medium Timing)=0D
Revision 01h, Header Type 82h, Bus Latency 40h=0D
Self test 00h (Self test not supported)=0D
Cache line size 32 Bytes (8 DWords)=0D
PCI Class Bridge, type PCI to Cardbus=0D
Subsystem ID 05521014h Unknown=0D
Subsystem Vendor 1014h IBM=0D
CardBus Socket/ExCa base memory address is B0000000h=0D
Address 0 is a Memory Address, prefetchable : FFFF0000h, limit : 00000000h=
=0D
System IRQ 11, INT# A=0D
PCI bus number 2, CardBus bus number 3, Subordinate bus number 5=0D
CardBus latency B0h=0D
Secondary Bus Command 03C0h (bus is in RESET, ints routed by ExCA)=0D
Secondary Bus Status 0200h (Medium Timing)=0D
New Capabilities List Present:=0D
Power Management Capability, Version 1.1=0D
Supports low power State D1=0D
Supports low power State D2=0D
Supports PME# from mode(s) D0, D1, D2, D3hot, D3cold=0D
Current Power State : D0 (Device operational, no power saving)=0D
=0D
Vendor 104Ch Texas Instruments (TI)=0D
Device AC46h PCI4520 PC card CardBus Controller=0D
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)=0D
Status 0210h (Has Capabilities List, Medium Timing)=0D
Revision 01h, Header Type 82h, Bus Latency 40h=0D
Self test 00h (Self test not supported)=0D
Cache line size 32 Bytes (8 DWords)=0D
PCI Class Bridge, type PCI to Cardbus=0D
Subsystem ID 05521014h Unknown=0D
Subsystem Vendor 1014h IBM=0D
CardBus Socket/ExCa base memory address is B1000000h=0D
Address 0 is a Memory Address, prefetchable : FFFF0000h, limit : 00000000h=
=0D
System IRQ 11, INT# B=0D
PCI bus number 2, CardBus bus number 6, Subordinate bus number 8=0D
CardBus latency B0h=0D
Secondary Bus Command 03C0h (bus is in RESET, ints routed by ExCA)=0D
Secondary Bus Status 0200h (Medium Timing)=0D
New Capabilities List Present:=0D
Power Management Capability, Version 1.1=0D
Supports low power State D1=0D
Supports low power State D2=0D
Supports PME# from mode(s) D0, D1, D2, D3hot, D3cold=0D
Current Power State : D0 (Device operational, no power saving)=0D
=0D
Vendor 8086h Intel Corporation=0D
Device 101Eh 82540EP Gigabit Ethernet Controller (Mobile)=0D
Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate, =
System Errors)=0D
Status 0230h (Has Capabilities List, Supports 66MHz, Medium Timing)=0D
Revision 03h, Header Type 00h, Bus Latency 40h=0D
Self test 00h (Self test not supported)=0D
Cache line size 32 Bytes (8 DWords)=0D
PCI Class Network, type Ethernet=0D
Subsystem ID 05491014h PRO/1000 MT Mobile Connection=0D
Subsystem Vendor 1014h IBM=0D
Address 0 is a Memory Address (anywhere in 0-4GiB) : C0220000h=0D
Address 1 is a Memory Address (anywhere in 0-4GiB) : C0200000h=0D
Address 2 is an I/O Port : 00008000h=0D
CIS can read from register 1 mapped memory, offset 20h=0D
System IRQ 11, INT# A=0D
Expansion ROM of 64 KiB decoded by this card, currently disabled=0D
New Capabilities List Present:=0D
Power Management Capability, Version 1.1=0D
Does not support low power State D1 or D2=0D
Supports PME# from mode(s) D0, D3hot, D3cold=0D
Current Power State : D0 (Device operational, no power saving)=0D
2000 mW D0 power consume=0D
1100 mW D3 power consume=0D
2000 mW D0 power dissipate=0D
1100 mW D3 power dissipate=0D
0 mW common logic power consume=0D
Message Signalled Interrupt Capability=0D
MSI is disabled=0D
MSI function can generate 64=0D
-bit addresses=0D
=0D
Vendor 8086h Intel Corporation=0D
Device 1043h PRO/Wireless LAN 2100 3B Mini PCI Adapter=0D
Command 0116h (Memory Access, BusMaster, MemWrite+Invalidate, System Error=
s)=0D
Status 0290h (Has Capabilities List, Supports Back-To-Back Trans., Medium =
Timing)=0D
Revision 04h, Header Type 00h, Bus Latency 40h=0D
Self test 00h (Self test not supported)=0D
Cache line size 32 Bytes (8 DWords)=0D
PCI Class Network, type Other=0D
Subsystem ID 25518086h PRO/Wireless LAN 2100 3B Mini PCI Adapter=0D
Subsystem Vendor 8086h Intel Corporation=0D
Address 0 is a Memory Address (anywhere in 0-4GiB) : C0210000h=0D
System IRQ 11, INT# A=0D
New Capabilities List Present:=0D
Power Management Capability, Version 1.1=0D
Does not support low power State D1 or D2=0D
Does not support PME# signalling=0D
Current Power State : D0 (Device operational, no power saving)=0D
2000 mW D0 power consume=0D
2000 mW D1 power consume=0D
2000 mW D2 power consume=0D
100 mW D3 power consume=0D
2000 mW D0 power dissipate=0D
2000 mW D1 power dissipate=0D
2000 mW D2 power dissipate=0D
100 mW D3 power dissipate=0D
2000 mW common logic power consume=0D
=0D
ROM PCI IRQ routing table Tests....=0D
ROM IRQ routing table found at F000h:DEA0h=0D
Table Version 1.0 - OK=0D
Table size 272 bytes - OK=0D
Table Checksum 5Dh - OK=0D
IRQ's dedicated to PCI : None=0D
The ROM PCI IRQ routing table appears to be OK.=0D
=0D
IRQ Summary: IRQs 11,14,15 are used by PCI devices=0D
Shared IRQs: IRQ 11 is shared by 12 PCI Devices=0D


>> Next Message >>

Return to [ 12 | July | 2004 ]



The Southern California OS/2 User Group
P.O. Box 26904
Santa Ana, CA 92799-6904, USA

Copyright 2001 the Southern California OS/2 User Group. ALL RIGHTS RESERVED.

SCOUG, Warp Expo West, and Warpfest are trademarks of the Southern California OS/2 User Group. OS/2, Workplace Shell, and IBM are registered trademarks of International Business Machines Corporation. All other trademarks remain the property of their respective owners.