said:
>I see. The sledgehammer approach to end-user training. :-)
No, it's the elegant way, right? ;-)
>>Changing PMDF to com2 allows the port to open. I'll try to set the port
>>in the 770x to com2
>This will work better.
Well, no matter what I did, I could not get pmdf to open port 2 in the
770x.
What did I do?
- Using ps2, changed the port to com2. Had to turn off the internal modem
in ps2 to avoid an irq conflict. ps2 shows IR enabled at com2.But pmdf
"connect" gives:
Opening com2
Error 21 Opening COM2
- The IR drivers had been loading. I tried to add correct arguments in
config.sys to the IR drivers. They wouldn't load, and I received the same
error. (I then remmed them out)
Changing com port configuration in pmdf back from com2 to com1, allows the
port to open.
--
-----------------------------------------------------------
"Mark Abramowitz"
-----------------------------------------------------------
=====================================================
To unsubscribe from this list, send an email message
to "steward@scoug.com". In the body of the message,
put the command "unsubscribe scoug-help".
For problems, contact the list owner at
"postmaster@scoug.com".
=====================================================
>> Next Message >>
Return to [ 15 |
January |
2006 ]
The Southern California OS/2 User Group
P.O. Box 26904
Santa Ana, CA 92799-6904, USA
Copyright 2001 the Southern California OS/2 User Group. ALL RIGHTS
RESERVED.
SCOUG, Warp Expo West, and Warpfest are trademarks of the Southern California OS/2 User Group.
OS/2, Workplace Shell, and IBM are registered trademarks of International
Business Machines Corporation.
All other trademarks remain the property of their respective owners.
