SCOUG-HELP Mailing List Archives

<< Previous Message << >> Next Message >>

Date:	Tue, 28 Mar 2006 18:06:11 PST8
From:	Colin Campbell <cmcampb@adelphia.net >
Reply-To:	scoug-help@scoug.com
To:	scoug-help@scoug.com
Subject:	SCOUG-Help: SATA Drives

Content Type: text/plain

Harry Motin wrote:
> Colin,
>
> On Tue, 28 Mar 2006 17:07:44 PST8, Colin Campbell wrote:
>
>> I'm sure you mean DANIS506, not Dani506s.
>
> Yes, you are right.
>
>
>> I have
>> BASEDEV=DANIS506.ADD /VL
>
> I now have the |?VL" switch. I temporarily tried the "/WL" switch and apparently Dani's
> driver does not recognize/see the SATA controller. It only sees the PATA controller
> and the 2 DVD/CD units attached to the secondary of the 2 PATA connectors
>
>
>
>> Finally, in the BIOS, I can set drives "Off" or "On"; naturally, I have
>> the two drives that I use set "On". I don't know what your BIOS allows
>> / requires, of course.
>
> I don't think the BIOS is the problem. I checked it again. The BIOS "detects" the SATA
> drive, and when I set that drive as the first boot device, the system boots to the
> Windows OS that is still loaded on the drive.
> HCM
>
>
Harry,
I don't know much else to suggest. When I boot, the SATA controllers
are seen first, then the PATA where I also have a DVD burner and a CD
burner.

I think it may be time to contact Daniela for help.
Colin

=====================================================

To unsubscribe from this list, send an email message
to "steward@scoug.com". In the body of the message,
put the command "unsubscribe scoug-help".

For problems, contact the list owner at
"postmaster@scoug.com".

=====================================================

Return to [ 28 | March | 2006 ]

SCOUG, Warp Expo West, and Warpfest are trademarks of the Southern California OS/2 User Group. OS/2, Workplace Shell, and IBM are registered trademarks of International Business Machines Corporation. All other trademarks remain the property of their respective owners.