SCOUG-HELP Mailing List Archives

<< Previous Message << >> Next Message >>

Date:	Sun, 2 Dec 2007 22:34:40 -0800
From:	"Jon Harrison" <jharrison@seadog.reno.nv.us >
Reply-To:	scoug-help@scoug.com
To:	< "scoug-help@scoug.com" > scoug-help@scoug.com >
Subject:	SCOUG-Help: SCSI help needed

Content Type: text/plain

On Sun, 2 Dec 2007 22:16:31 -0800, Steven Levine wrote:

>
>This is a classic symptom of a temperature problem. Sometimes a can of
>freeze spray and a heat gun can be helpful in tracking these down.

Right, but I have a cpu temp monitor on the desktop and watch it
closely. Of course there are plenty of other possibilities.

I had another failure backing up my data, there is one partition
that may be the culprit. Next on the list is a cloning of the
drive and replacement. That failure was the last straw for my
Adaptec LVD. I pulled it, moved my drives back to my old symbios
that was serving only my CD.

Anyway, I just booted the system normally and it's going....so
far...

It's been smooth sailing for the last 30 min, but I've been down
this road before. So can't count my chickens yet. Now my only
glitch is figuring out why the CD won't boot any more. Guess I'll
tear it all down again and move the CD to id 0 and see if that
makes the difference. Also, beats me, but there is no terminator
jumper on the CD, and the doc's indicate there is one. This isn't
the first time I've found scsi stuff to be incorrectly documented.

Thanks for the tip on the freeze spray, never occured to me.

Jon

=====================================================

To unsubscribe from this list, send an email message
to "steward@scoug.com". In the body of the message,
put the command "unsubscribe scoug-help".

For problems, contact the list owner at
"postmaster@scoug.com".

=====================================================

Return to [ 02 | December | 2007 ]

SCOUG, Warp Expo West, and Warpfest are trademarks of the Southern California OS/2 User Group. OS/2, Workplace Shell, and IBM are registered trademarks of International Business Machines Corporation. All other trademarks remain the property of their respective owners.