SCOUG-HELP Mailing List Archives

<< Previous Message << >> Next Message >>

Date:	Fri, 5 Oct 2007 12:51:14 -0700
From:	Tom Brown <thomabrown@gmail.com >
Reply-To:	scoug-help@scoug.com
To:	scoug-help@scoug.com
Subject:	SCOUG-Help: Out of space for Option ROMs!

Content-Transfer-Encoding: 7bit

Configuration summary:

Motherboard: Tyan S2985-ANRF Thunder K8WE
http://www.tyan.com/product_board_detail.aspx?pid=151
BIOS: Phoenix TrustedCore Server, V 1.05.2895, dated 2-07-07
CPUs: 2 AMD Opteron 248, 2.2 GHz
RAM: 2 GiB ECC registered
CD/DVD Writer: Plextor PX-755A SATA (SATA0, Port0)
Disk: 2 x Seagate ST373307LW U320 SCSI on MB channel A
Video: ATI X600Pro 256MB PCIe
Power: PC Power & Cooling TurboCool 850

This motherboard includes an integrated LSI 53c1030 u320 dual SCSI
controller and a dual integrated NIC via the NForce chipset.

I have been trying to get eCS 2.0RC2 installed with little success. I
had two Plextor SCSI optical drives attached on channel B which I was
attempting to use to install 2.0RC2. Due to many hangs during the
installation process where the CD drive would turn from green to
flashing yellow, I unhooked both drives and tried just using the PX-755A
on the SATA channel to do the install.

After re-configuring the BIOS to (theoretically) support this, and
flashing the BIOS to the latest version (V 1.03 --> V 1.05), I get the
following:

___________________________________________________________________________
ERROR
Out of space for Option ROMS! The OptionROM for the following
device- PCI mass Storage Controller on Motherboard
Bus:0A, Device:06, Function:01 was unable to run due to memory
constraints

Press to resume, to Setup
___________________________________________________________________________

PCI.EXE shows bus 10 (it uses decimal) as being the onboard SCSI
controller, with function 1 being channel B. There is currently nothing
on this channel. The Plextor SCSI optical drives WERE attached here.

So, the questions:

1. How can the board be out of memory for the onboard SCSI controller?
2. What can I do about it?

There are no other cards in the system!

PCI output attached for reference.

Any help will be greatly appreciated, including, but not limited to,
pointers to educational material, pointers to documentation, and problem
solution!

I would especially appreciate any pointers to BIOS documentation. The
explanations in the Tyan manual are cryptic, at best.

Thanks!

name="pciout.txt"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline;
filename="pciout.txt"

Craig Hart's PCI+AGP bus sniffer, Version 1.04vkA, freeware made in 1996-2005.
Loaded Vendor Data : "This is version 638 of this file; 02-04-2007 (D-M-Y)."

PCI BIOS Version 3.00 found!
Number of PCI Busses : 130
PCI Characteristics : Config Mechanism 1

Searching for PCI Devices using the System BIOS

Bus 0 (PCI Express), Device Number 0, Device Function 0
Vendor 10DEh Nvidia Corp
Device 005Eh nForce4 Memory Controller
Command 0006h (Memory Access, BusMaster)
Status 00B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Fast Timing)
Revision A3h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Memory, type Other
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
New Capabilities List Present:
HyperTransport Capability
SubType : Slave/Primary Interface
Base UnitID : 0
UnitID Count : 15
HyperTransport Capability
SubType : MSI Mapping

Bus 0 (PCI Express), Device Number 1, Device Function 0
Vendor 10DEh Nvidia Corp
Device 0051h nForce4 ISA Bridge
Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles)
Status 00A0h (Supports 66MHz, Supports Back-To-Back Trans., Fast Timing)
Revision A3h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to ISA
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
Address 0 is an I/O Port : 8C00h

Bus 0 (PCI Express), Device Number 1, Device Function 1
Vendor 10DEh Nvidia Corp
Device 0052h nForce4 SMBus
Command 0001h (I/O Access)
Status 00B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Fast Timing)
Revision A2h, Header Type 80h, Bus Latency Timer 00h
Minimum Bus Grant 03h, Maximum Bus Latency 01h
Self test 00h (Self test not supported)
PCI Class Serial, type SMBus Controller
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
Address 0 is an I/O Port : 0000h (unconfigured)
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : A000h
Address 5 is an I/O Port : A040h
System IRQ (disabled), INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 2, Device Function 0
Vendor 10DEh Nvidia Corp
Device 005Ah nForce4 USB Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 00B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Fast Timing)
Revision A2h, Header Type 80h, Bus Latency Timer 00h
Minimum Bus Grant 03h, Maximum Bus Latency 01h
Self test 00h (Self test not supported)
PCI Class Serial, type USB (OHCI)
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
Address 0 is a Memory Address (0-4GiB) : B0000000h
System IRQ 10, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 2, Device Function 1
Vendor 10DEh Nvidia Corp
Device 005Bh nForce4 USB 2.0 Controller
Command 0006h (Memory Access, BusMaster)
Status 00B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Fast Timing)
Revision A3h, Header Type 80h, Bus Latency Timer 00h
Minimum Bus Grant 03h, Maximum Bus Latency 01h
Self test 00h (Self test not supported)
PCI Class Serial, type USB 2.0 (EHCI)
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
Address 0 is a Memory Address (0-4GiB) : B0001000h
System IRQ 7, INT# B
New Capabilities List Present:
USB 2.0 EHCI Debug Port Capability
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 4, Device Function 0
Vendor 10DEh Nvidia Corp
Device 0059h nForce4 AC'97 Audio Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 00B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Fast Timing)
Revision A2h, Header Type 00h, Bus Latency Timer 00h
Minimum Bus Grant 02h, Maximum Bus Latency 05h
Self test 00h (Self test not supported)
PCI Class Multimedia, type Audio
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
Address 0 is an I/O Port : 1800h
Address 1 is an I/O Port : 1400h
Address 2 is a Memory Address (0-4GiB) : B0002000h
System IRQ 11, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 6, Device Function 0
Vendor 10DEh Nvidia Corp
Device 0053h nForce4 Parallel ATA Controller
Command 0005h (I/O Access, BusMaster)
Status 00B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Fast Timing)
Revision F2h, Header Type 00h, Bus Latency Timer 00h
Minimum Bus Grant 03h, Maximum Bus Latency 01h
Self test 00h (Self test not supported)
PCI Class Storage, type IDE (ATA)
PCI EIDE Controller Features :
BusMaster EIDE is supported
Primary Channel is at I/O Port 01F0h and IRQ 14
Secondary Channel is at I/O Port 0170h and IRQ 15
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
Address 0 is not present or not configured!
Address 1 is not present or not configured!
Address 2 is not present or not configured!
Address 3 is not present or not configured!
Address 4 is an I/O Port : 1C00h
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 7, Device Function 0
Vendor 10DEh Nvidia Corp
Device 0054h nForce4 Serial ATA Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 00B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Fast Timing)
Revision F3h, Header Type 00h, Bus Latency Timer 00h
Minimum Bus Grant 03h, Maximum Bus Latency 01h
Self test 00h (Self test not supported)
PCI Class Storage, type IDE (ATA)
PCI EIDE Controller Features :
BusMaster EIDE is supported
Primary Channel is in native mode at Addresses 0 & 1
Secondary Channel is in native mode at Addresses 2 & 3
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
Address 0 is an I/O Port : 1C40h
Address 1 is an I/O Port : 1C34h
Address 2 is an I/O Port : 1C38h
Address 3 is an I/O Port : 1C30h
Address 4 is an I/O Port : 1C10h
Address 5 is a Memory Address (0-4GiB) : B0003000h
System IRQ 11, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 8, Device Function 0
Vendor 10DEh Nvidia Corp
Device 0055h nForce4 Serial ATA Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 00B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Fast Timing)
Revision F3h, Header Type 00h, Bus Latency Timer 00h
Minimum Bus Grant 03h, Maximum Bus Latency 01h
Self test 00h (Self test not supported)
PCI Class Storage, type IDE (ATA)
PCI EIDE Controller Features :
BusMaster EIDE is supported
Primary Channel is in native mode at Addresses 0 & 1
Secondary Channel is in native mode at Addresses 2 & 3
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
Address 0 is an I/O Port : 1C58h
Address 1 is an I/O Port : 1C4Ch
Address 2 is an I/O Port : 1C50h
Address 3 is an I/O Port : 1C48h
Address 4 is an I/O Port : 1C20h
Address 5 is a Memory Address (0-4GiB) : B0004000h
System IRQ 10, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 9, Device Function 0
Vendor 10DEh Nvidia Corp
Device 005Ch nForce4 PCI Bridge
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 00A0h (Supports 66MHz, Supports Back-To-Back Trans., Fast Timing)
Revision A2h, Header Type 01h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to PCI (Subtractive Decode)
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 1, Subordinate Bus number 1
Secondary Bus Command 0204h (ISA mapping)
Secondary Bus Status 2280h (Supports Back-To-Back Trans.,
Received Master Abort, Medium Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : None
Memory Range Passed to Secondary Bus : None
Prefetchable Memory Range Passed to Secondary Bus : None

Bus 0 (PCI Express), Device Number 10, Device Function 0
Vendor 10DEh Nvidia Corp
Device 0057h nForce4 Ethernet Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 00B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Fast Timing)
Revision A3h, Header Type 00h, Bus Latency Timer 00h
Minimum Bus Grant 01h, Maximum Bus Latency 14h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to Other
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
Address 0 is a Memory Address (0-4GiB) : B0005000h
Address 1 is an I/O Port : 1C60h
System IRQ 10, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)

Bus 0 (PCI Express), Device Number 14, Device Function 0
Vendor 10DEh Nvidia Corp
Device 005Dh nForce4 PCI Express Bridge
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision A3h, Header Type 01h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Bridge, type PCI to PCI
PCI Bridge Information:
Primary Bus Number 0, Secondary Bus Number 2, Subordinate Bus number 2
Secondary Bus Command 000Ch (ISA mapping, VGA mapping)
Secondary Bus Status 2000h (Received Master Abort, Fast Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : 00002000h..00002FFFh (32-bit)
Memory Range Passed to Secondary Bus : B0100000h..B01FFFFFh
Prefetchable Memory Range Passed to Secondary Bus : C0000000h..CFFFFFFFh
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 64-bit addresses
HyperTransport Capability
SubType : MSI Mapping
PCI Express Capability, Version 1
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Fatal
Device Status :
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x16
Link Port Number : 0
Link Control :
Asynchronous Clocking in Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x16
Slot Capabilities :
Slot Power Limit Value : 0.000 Watts
Physical slot Number 0

Bus 0 (PCI Express), Device Number 24, Device Function 0
Vendor 1022h Advanced Micro Devices (AMD)
Device 1100h Athlon 64 / Opteron HyperTransport Technology Configuration
Command 0000h (Bus Access Disabled!!)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 00h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST
New Capabilities List Present:
HyperTransport Capability
SubType : Host/Secondary Interface
HyperTransport Capability
SubType : Host/Secondary Interface
HyperTransport Capability
SubType : Host/Secondary Interface

Bus 0 (PCI Express), Device Number 24, Device Function 1
Vendor 1022h Advanced Micro Devices (AMD)
Device 1101h Athlon 64 / Opteron Address Map
Command 0000h (Bus Access Disabled!!)
Status 0000h
Revision 00h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST

Bus 0 (PCI Express), Device Number 24, Device Function 2
Vendor 1022h Advanced Micro Devices (AMD)
Device 1102h Athlon 64 / Opteron DRAM Controller
Command 0000h (Bus Access Disabled!!)
Status 0000h
Revision 00h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST

Bus 0 (PCI Express), Device Number 24, Device Function 3
Vendor 1022h Advanced Micro Devices (AMD)
Device 1103h Athlon 64 / Opteron Miscellaneous Control
Command 0000h (Bus Access Disabled!!)
Status 0000h
Revision 00h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST

Bus 0 (PCI Express), Device Number 25, Device Function 0
Vendor 1022h Advanced Micro Devices (AMD)
Device 1100h Athlon 64 / Opteron HyperTransport Technology Configuration
Command 0000h (Bus Access Disabled!!)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 00h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST
New Capabilities List Present:
HyperTransport Capability
SubType : Host/Secondary Interface
HyperTransport Capability
SubType : Host/Secondary Interface
HyperTransport Capability
SubType : Host/Secondary Interface

Bus 0 (PCI Express), Device Number 25, Device Function 1
Vendor 1022h Advanced Micro Devices (AMD)
Device 1101h Athlon 64 / Opteron Address Map
Command 0000h (Bus Access Disabled!!)
Status 0000h
Revision 00h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST

Bus 0 (PCI Express), Device Number 25, Device Function 2
Vendor 1022h Advanced Micro Devices (AMD)
Device 1102h Athlon 64 / Opteron DRAM Controller
Command 0000h (Bus Access Disabled!!)
Status 0000h
Revision 00h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST

Bus 0 (PCI Express), Device Number 25, Device Function 3
Vendor 1022h Advanced Micro Devices (AMD)
Device 1103h Athlon 64 / Opteron Miscellaneous Control
Command 0000h (Bus Access Disabled!!)
Status 0000h
Revision 00h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to HOST

Bus 2 (AGP), Device Number 0, Device Function 0
Vendor 1002h ATI Technologies Inc
Device 5B62h Radeon X600 Series
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 00h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Display, type VGA
Subsystem ID 1B621002h Unknown
Subsystem Vendor 1002h ATI Technologies Inc
Address 0 is a Memory Address (0-4GiB, Prefetchable) : C0000000h
Address 1 is an I/O Port : 2000h
Address 2 is a Memory Address (0-4GiB) : B0100000h
System IRQ 5, INT# A
Expansion ROM of 128 KiB decoded by this card, currently disabled
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
PCI Express Capability, Version 1
Device/Port Type :
PCI Express Endpoint Device
Device Capabilities :
Unsupported Request Severity is Fatal
Device Status :
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x16
Link Port Number : 0
Link Control :
Asynchronous Clocking in Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x16
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 64-bit addresses

Bus 2 (AGP), Device Number 0, Device Function 1
Vendor 1002h ATI Technologies Inc
Device 5B72h Radeon X600 Series - Secondary
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 0010h (Has Capabilities List, Fast Timing)
Revision 00h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Display, type Other
Subsystem ID 1B631002h Unknown
Subsystem Vendor 1002h ATI Technologies Inc
Address 0 is a Memory Address (0-4GiB) : B0110000h
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
PCI Express Capability, Version 1
Device/Port Type :
PCI Express Endpoint Device
Device Capabilities :
Unsupported Request Severity is Non-Fatal
Device Status :
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x16
Link Port Number : 0
Link Control :
Asynchronous Clocking in Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x16

Bus 8 (PCI), Device Number 10, Device Function 0
Vendor 1022h Advanced Micro Devices (AMD)
Device 7450h AMD-8131 PCI-X Bridge
Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
System Errors)
Status 0230h (Has Capabilities List, Supports 66MHz, Medium Timing)
Revision 12h, Header Type 81h, Bus Latency Timer 40h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to PCI
PCI Bridge Information:
Primary Bus Number 8, Secondary Bus Number 9, Subordinate Bus number 9
Secondary Bus Command 0004h (ISA mapping)
Secondary Bus Status 2220h (Supports 66MHz, Received Master Abort,
Medium Timing)
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : 0000F000h..00000FFFh (32-bit)
Memory Range Passed to Secondary Bus : None
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI-X Capability
Secondary AD Interface Size is 64-bits wide
Secondary Bus Maximum Speed in PCI-X Mode 1 is 133MHz
Secondary Bus is PCI-X 266 Capable : No
Secondary Bus is PCI-X 533 Capable : No
Secondary Bus Current Speed : PCI-X Mode 1 (133MHz)
Primary AD Interface size is 64-bits wide
Primary AD Bus Maximum Speed in PCI-X mode 1 is 133MHz
Primary Bus is PCI-X 266 Capable : No
Primary Bus is PCI-X 533 Capable : No
HyperTransport Capability
SubType : Interrupt Discovery & Configuration
HyperTransport Capability
SubType : Slave/Primary Interface
Base UnitID : 10
UnitID Count : 2

Bus 8 (PCI), Device Number 10, Device Function 1
Vendor 1022h Advanced Micro Devices (AMD)
Device 7451h AMD-8131 PCI-X IOAPIC
Command 0006h (Memory Access, BusMaster)
Status 0200h (Medium Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class System, type I/O APIC

Bus 8 (PCI), Device Number 11, Device Function 0
Vendor 1022h Advanced Micro Devices (AMD)
Device 7450h AMD-8131 PCI-X Bridge
Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
System Errors)
Status 0230h (Has Capabilities List, Supports 66MHz, Medium Timing)
Revision 12h, Header Type 81h, Bus Latency Timer 40h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to PCI
PCI Bridge Information:
Primary Bus Number 8, Secondary Bus Number 10, Subordinate Bus number 10
Secondary Bus Command 0004h (ISA mapping)
Secondary Bus Status 2220h (Supports 66MHz, Received Master Abort,
Medium Timing)
Secondary Bus Latency 88h
I/O Port Range Passed to Secondary Bus : 00003000h..00003FFFh (32-bit)
Memory Range Passed to Secondary Bus : D0000000h..D03FFFFFh
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
PCI-X Capability
Secondary AD Interface Size is 64-bits wide
Secondary Bus Maximum Speed in PCI-X Mode 1 is 133MHz
Secondary Bus is PCI-X 266 Capable : No
Secondary Bus is PCI-X 533 Capable : No
Secondary Bus Current Speed : PCI-X Mode 1 (100MHz)
Primary AD Interface size is 64-bits wide
Primary AD Bus Maximum Speed in PCI-X mode 1 is 133MHz
Primary Bus is PCI-X 266 Capable : No
Primary Bus is PCI-X 533 Capable : No
HyperTransport Capability
SubType : Interrupt Discovery & Configuration

Bus 8 (PCI), Device Number 11, Device Function 1
Vendor 1022h Advanced Micro Devices (AMD)
Device 7451h AMD-8131 PCI-X IOAPIC
Command 0006h (Memory Access, BusMaster)
Status 0200h (Medium Timing)
Revision 01h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class System, type I/O APIC

Bus 10 (PCI-X), Device Number 6, Device Function 0
Vendor 1000h LSI Logic (Was: Symbios Logic, NCR)
Device 0030h LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller
Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
System Errors)
Status 0230h (Has Capabilities List, Supports 66MHz, Medium Timing)
Revision 07h, Header Type 80h, Bus Latency Timer 80h
Minimum Bus Grant 10h, Maximum Bus Latency 06h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Storage, type SCSI
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
Address 0 is an I/O Port : 3000h
Address 1 is a Memory Address (64-bit) : D0100000h
Address 3 is a Memory Address (64-bit) : D0000000h
System IRQ 5, INT# A
Expansion ROM of 1 MiB decoded by this card, currently disabled
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 64-bit addresses
PCI-X Capability
Primary AD Interface size is 64-bits wide
Primary AD Bus Maximum Speed in PCI-X mode 1 is 133MHz
Primary Bus is PCI-X 266 Capable : No
Primary Bus is PCI-X 533 Capable : No

Bus 10 (PCI-X), Device Number 6, Device Function 1
Vendor 1000h LSI Logic (Was: Symbios Logic, NCR)
Device 0030h LSI53C1020/1030 PCI-X to Ultra320 SCSI Controller
Command 0117h (I/O Access, Memory Access, BusMaster, MemWrite+Invalidate,
System Errors)
Status 0230h (Has Capabilities List, Supports 66MHz, Medium Timing)
Revision 07h, Header Type 80h, Bus Latency Timer 80h
Minimum Bus Grant 10h, Maximum Bus Latency 06h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Storage, type SCSI
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
Address 0 is an I/O Port : 3400h
Address 1 is a Memory Address (64-bit) : D0300000h
Address 3 is a Memory Address (64-bit) : D0200000h
System IRQ 11, INT# B
Expansion ROM of 1 MiB decoded by this card, currently disabled
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Does not support PME# signalling
Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 64-bit addresses
PCI-X Capability
Primary AD Interface size is 64-bits wide
Primary AD Bus Maximum Speed in PCI-X mode 1 is 133MHz
Primary Bus is PCI-X 266 Capable : No
Primary Bus is PCI-X 533 Capable : No

Bus 128 (PCI Express), Device Number 0, Device Function 0
Vendor 10DEh Nvidia Corp
Device 005Eh nForce4 Memory Controller
Command 0006h (Memory Access, BusMaster)
Status 00B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Fast Timing)
Revision A3h, Header Type 00h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Memory, type Other
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
New Capabilities List Present:
HyperTransport Capability
SubType : Slave/Primary Interface
Base UnitID : 0
UnitID Count : 15
HyperTransport Capability
SubType : MSI Mapping

Bus 128 (PCI Express), Device Number 1, Device Function 0
Vendor 10DEh Nvidia Corp
Device 00D3h nForce4 Memory Controller
Command 000Fh (I/O Access, Memory Access, BusMaster, Special Cycles)
Status 00A0h (Supports 66MHz, Supports Back-To-Back Trans., Fast Timing)
Revision A3h, Header Type 80h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
PCI Class Memory, type Other
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
Address 0 is not present or not configured!
Address 1 is a Memory Address (0-4GiB) : D0600000h

Bus 128 (PCI Express), Device Number 10, Device Function 0
Vendor 10DEh Nvidia Corp
Device 0057h nForce4 Ethernet Controller
Command 0007h (I/O Access, Memory Access, BusMaster)
Status 00B0h (Has Capabilities List, Supports 66MHz,
Supports Back-To-Back Trans., Fast Timing)
Revision A3h, Header Type 00h, Bus Latency Timer 00h
Minimum Bus Grant 01h, Maximum Bus Latency 14h
Self test 00h (Self test not supported)
PCI Class Bridge, type PCI to Other
Subsystem ID 289510F1h Unknown
Subsystem Vendor 10F1h Tyan Computer
Address 0 is a Memory Address (0-4GiB) : D0601000h
Address 1 is an I/O Port : 4000h
System IRQ 5, INT# A
New Capabilities List Present:
Power Management Capability, Version 1.1
Supports low power State D1
Supports low power State D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)

Bus 128 (PCI Express), Device Number 14, Device Function 0
Vendor 10DEh Nvidia Corp
Device 005Dh nForce4 PCI Express Bridge
Command 0107h (I/O Access, Memory Access, BusMaster, System Errors)
Status 0010h (Has Capabilities List, Fast Timing)
Revision A3h, Header Type 01h, Bus Latency Timer 00h
Self test 00h (Self test not supported)
Cache line size 64 Bytes (16 DWords)
PCI Class Bridge, type PCI to PCI
PCI Bridge Information:
Primary Bus Number 128, Secondary Bus Number 129, Subordinate Bus number 129
Secondary Bus Command 0004h (ISA mapping)
Secondary Bus Status 0000h
Secondary Bus Latency 00h
I/O Port Range Passed to Secondary Bus : 0000F000h..00000FFFh (32-bit)
Memory Range Passed to Secondary Bus : None
Prefetchable Memory Range Passed to Secondary Bus : None
New Capabilities List Present:
Power Management Capability, Version 1.1
Does not support low power State D1 or D2
Supports PME# signalling from mode(s) D0, D1, D2, D3hot, D3cold
PME# signalling is currently disabled
3.3v AUX Current required : 0 mA (Self powered)
Current Power State : D0 (Device operational, no power saving)
Message Signalled Interrupt Capability
MSI is disabled
MSI function can generate 64-bit addresses
HyperTransport Capability
SubType : MSI Mapping
PCI Express Capability, Version 1
Device/Port Type :
Root port of PCI Express Root Complex
Port Type :
Port is an Expansion Slot
Unsupported Request Severity is Fatal
Device Status :
Link Capabilities :
Maximum Link speed : 2.5Gb/s
Maximum Link Width : x16
Link Port Number : 0
Link Control :
Asynchronous Clocking in Use
Link Status :
Current Link speed : 2.5Gb/s
Current Link Width : x16
Slot Capabilities :
Slot Power Limit Value : 0.000 Watts
Physical slot Number 0

ROM PCI IRQ routing table Tests....
ROM IRQ routing table found at F000h:DDF0h
Table Version 1.0 - OK
Table size 0 bytes - Invalid Size!
IRQ's dedicated to PCI : None
The ROM PCI IRQ routing table appears to be faulty!!

IRQ Summary: IRQs 5,7,10,11,14,15 are used by PCI devices
Shared IRQs: IRQ 5 is shared by 3 PCI Devices
IRQ 10 is shared by 3 PCI Devices
IRQ 11 is shared by 3 PCI Devices

=====================================================

To unsubscribe from this list, send an email message
to "steward@scoug.com". In the body of the message,
put the command "unsubscribe scoug-help".

For problems, contact the list owner at
"postmaster@scoug.com".

=====================================================

Return to [ 05 | October | 2007 ]

SCOUG, Warp Expo West, and Warpfest are trademarks of the Southern California OS/2 User Group. OS/2, Workplace Shell, and IBM are registered trademarks of International Business Machines Corporation. All other trademarks remain the property of their respective owners.